Utility Vehicle Applications
Material Handling Jibs
4"x4" fiberglass reinforced arms, supplied by Composite Essential Materials, are capable of picking up multiple F-150's.
Whether you need composite parts manufactured, gel coated, or machined, we are ready to deliver.
Composite Man Lift Buckets
Lightweight fiberglass reinforced buckets, manufactured by Composite Essential Materials via LRTM, safely lift linemen nearly 200 feet.
We're happy to make your plug, mold, and finished composite parts using a variety of close molding or open molding techniques.
Composite Utility Body Input Materials
CEM is proud to supply composite materials and components used in advanced composite utility bodies.
Enjoy the performance of fiberglass reinforced polyurethane boards at a much lower cost.
Recomp is made up of 90%-94% recycled polyurethane, PET, PVC, and fiberglass re-aggregated under pressure with minimum percentages of virgin adhesives. The process is patented and generates a material that can be recycled again at the end of its life. Recomp board is available in densities ranging from 28 lb./ft^3 to 68 lb./ft^3 with mechanical properties comparable to fiberglass reinforced polyurethane boards. Recomp is excellent for use as a core in sandwich panels and can be drilled, milled, water jet cut, cut with a circular saw or jigsaw, glued, screwed, and laminated. Recomp is dimensionally stable, resistant to all environmental conditions, and has excellent insulation properties.
Fiberglass Reinforced Polyurethane Board
High-density, closed-cell polyurethane foam boards
reinforced with woven fiberglass fabric or continuous strand fiberglass are stronger than plywood but are not susceptible to warping or rotting when in contact with moisture.
Premade sandwich panels are great for bulkheads, shelves, back plates, doors, and anything that needs to be lightweight, stiff, impact resistant, and water proof.
-Fiberglass reinforced skin on both sides of the core
-Pre-drilled mounting locations
-Embedded mounting receivers
FRP skins are used alone or to create sandwich panels. Thicknesses range from 1/16" (1.6mm) to about 3/16" (4.7mm). Fiberglass chop strand mat and woven roving reinforcements are available to suit your cosmetic or structural needs.
Skins are available in any solid color or custom design, matte, high gloss, textured, anti-slip, fire retardant, self extinguishing, and low density.
Nidaplast Impact Performance Video
It's amazing that the only difference between these two sandwich panels is the core. Nidaplast honeycombs offer more impact resistance than any other core we're aware of.
We offer structural MMA, Epoxy, and Cyanoacrylate adhesives whether you need a 5 minute or 50 minute working time, 25% or 125% elongation, custom color, custom viscosity or thixotropy, or need to bond to unique materials.
540 NW University Blvd, Suite 103
Port Saint Lucie, FL 34986
+1 (772) - 342 - 4991