Wind Turbine Applications

Ask us about our white UV resistant gel coats for wind turbines.

MATLINE is a low density core material used for print blocking.  It's commonly saturated with resin and applied between the skin laminate and bulk laminate.  It is also used as a lower density core material in place of reinforcing fibers to increase the laminate stiffness and physical thickness at the same weight or to retain existing stiffness at a lower weight.

Matline is highly conformable during laminating due to extra perforations that speed wet out and encourage drapability.  It's easy to use and handle, and won't tear after saturating with resin.  Matline is available in thicknesses ranging from 1mm to 5mm.  The minimum recommended thickness for print blocking applications is 2mm.

Nidaplast honeycomb core can be used in the entire wind turbine nacelle.  Scored Nidaplast honeycomb conforms to curved surfaces.

It's amazing that the only difference between these two sandwich panels is the core.  Nidaplast offers more impact resistance than any other core that we've come across throughout the years.

Whether you're chop spraying, hand laying, vacuum infusing or light resin transfer molding, we offer Vinyl Ester, Polyester, and hybrid resins that allow you to meet your design objectives.

We offer a full range of Saertex products to allow significant weight reduction, energy savings, enhanced stiffness and corrosion resistance.  We also offer chopper gun fiberglass roving and chop strand mat.

We provide Diatex's full line of high performance infusion products.

We offer structural MMA, Epoxy, and Cyanoacrylate adhesives whether you need a 5 minute or 50 minute working time, 25% or 125% elongation, custom color, custom viscosity or thixotropy, or need to bond to unique materials.