Matline is one of our best sellers and now you can purchase our short rolls at a steep discount!

​

MATLINE is a low density core material used for print blocking.  It's commonly saturated with resin and applied between the skin laminate and bulk laminate.  It is also used as a lower density core material in place of reinforcing fibers to increase the laminate stiffness and physical thickness at the same weight or to retain existing stiffness at a lower weight.

 

Matline is highly conformable during laminating due to extra perforations that speed wet out and encourage drapability.  It's easy to use and handle, and won't tear after saturating with resin.  Matline is available in thicknesses ranging from 1mm to 5mm.  The minimum recommended thickness for print blocking applications is 2mm.

​

Click the PDF link below to learn more about the 3 versions available on clearance:

​

-Matline 301, $50/roll, dimensions = 3mm x 18.8 in x 164 ft = 257sqft/roll, 38 rolls on hand as of 11/22/22

​

-Matline 301, $75/roll, dimensions = 3mm x 28 in x 164 ft = 377 sqft, 54 rolls on hand as of 11/22/22

​

-Matline 401, $35/roll, dimensions = 4mm x 10.7 in x 131 ft = 117 sqft, 206 rolls on hand as of 11/22/22

​

Small quantities can ship via UPS and up to 90 short rolls fit on a single pallet to minimize freight cost

​

​

​

​

​

Would you like to install a beautiful and inexpensive walkway, driveway, playground surface, or patio area?  Do you want to eliminate unwanted ruts or puddles? 

 

Nidagravel honeycomb sheets stabilize gravel and create a firm and stable surface for pedestrians and any wheeled vehicle.  The geotextile fabric thermally bonded to the underside of Nidagravel honeycomb prevents weed growth and allows water to drain through.

 

Click the PDF links below to learn more about the 3 versions available on clearance:

​

-Nidagravel 129 ($18/sheet, sheet dimensions = 1.14" x 31.5" x 47.25", 100 sheets on hand as of 11/22/22)

 

-Nidagravel 130 ($30/sheet, sheet dimensions = 1.18" x 47.25" x 86.61", 75 sheets on hand as of 11/22/22)

​

-Nidagravel 140 ($35/sheet, sheet dimensions = 1.57" x 47.25" x 86.61", 56 sheets on hand as of 11/22/22)

​

​

​

​

 

 

 

Looking for inexpensive Balsa core for your next project?  We have a limited supply of 10-12 lb/ft^3 balsa core sheets in the configurations listed below:

​

1/4" thick, rigid panel, $120 for box of 40 sheets totaling 320 sqft, 1 box available as of 11/22/22

 

3/8" thick, scrimmed and scored 1"x2", $120 for box of 28 sheets totaling 224 sqft, 13 boxes available as of 11/22/22

​

3/8" thick, sealed, scrimmed and scored 1"x2", $120 for box of 28 sheets totaling 224 sqft, 1 box available as of 11/22/22

​

1 1/8" thick, sealed, scrimmed and scored 1"x2", $120 for box of 10 sheets totaling 80 sqft, 3 boxes available as of 11/22/22

​

1 1/4" thick, sealed, scrimmed and scored 1"x 2", $120 for box of 9 sheets totaling 72 sqft, 2 boxes available as of 11/22/22

​

2" thick, scrimmed and scored 1"x 2", $120 for box of 5 sheets totaling 40 sqft, 4 boxes available as of 11/22/22

​

Up to 14 boxes fit on a pallet for cost effective freight

​

Our VE thixotropic resin is great for high quality mold building, marine applications, and any other application that demands the high performance of VE resin.

​

We have one drum of Polyprocess VE 100 @ $3.45/lb and we have 17 drums of Nord Norester 842 @ $3.25/lb as of 11/22/22

​

Click the PDF links below to learn more about each option

​

​

​

​

​

Need a light, stiff, corrosion resistant sandwich panel?  Click the PDF link below to learn more about our aluminum honeycomb panels on clearance:

​

10 mm x 4 ft x 8ft panel, $170 per panel, 10 panels available as of 11/22/22

​

13 mm x 4 ft x 8ft panel, $180 per panel, 24 panels available as of 11/22/22

​

20 mm x 4 ft x 8ft panel, $200 per panel, 2 panels available as of 11/22/22

​

​

​

​

​

​